 |
Titespot® Coolant Driven Drill Heads Angle Heads Spindle Speeders Keycutters |
|
||
|
|
|
Angle Heads / Spindle Speeders How They Work | Performance Data | Sizes and Dimensions | How to Order Torque Is Based On PressureCoolant pressure required to operate Titespot® Angle Heads ranges from 200 psi to 2000 psi depending upon the "load" of the application. Call our Application Engineering Dept. toll free 1-877-435-8665 with your application details.Under test conditions, the ELTOOL ball piston motor develops 1.9 inch pounds of torque per each 100 psi of coolant pressure. Many things affect actual performance including viscosity of the coolant and condition of the motor itself. The following chart shows speed (rpm) at various coolant pressures under various load conditions. (Pressure in psi x .019) x (Flow in gpm x 900) 63025 Speed Is Based On FlowAt approximately 70% volumetric efficiency the .18 cu. in/rev ball piston motor will rotate at about 900 rpm's per gpm flow. (231 x .7/.18) |
|
