Torque Is Based On Pressure

 

Coolant pressure required to operate a Titespot® Right Angle Drill Head ranges from 200 to 2000 psi depending upon the "load" of the application.

Coolant pressure required to operate a Titespot® Right Angle Drill Head ranges from 14 to 140 bar depending upon the "load" of the application.

Under test conditions, the ELTOOL ball piston motor develops .019 inch pounds of torque per psi of coolant pressure. Many things affect actual performance including viscosity of the coolant and condition of the motor itself.

Under test conditions, the ELTOOL ball piston motor develops .03 Nm per bar of coolant pressure. Many things affect actual performance including viscosity of the coolant and condition of the motor itself

Speed Is Based On Flow

 

At approximately 70% volumetric efficiency the ball piston motor will rotate at about 900 rpm per gpm of flow.

At approximately 70% volumetric efficiency the ball piston motor will rotate at about 238 rpm per lpm of flow.

The calculator below can be used to see speed (rpm) torque and power at various coolant pressures and flow rates.

Call our Application Engineering Dept. 1-877-435-8665 (1-513-723-1772 ) with your application details.

 

 

Enter your coolant pressure

Enter your flow

PSI Bar		Flow in GPM Flow in LPM
Torque:	in. lbs Nm
Speed:	rpm
Horsepower: Kilowatts: