|
|
 |
|
|
|
The Proven Solution
Eliminate secondary operations. Improve accuracy. Reduce tool and set-up costs.
Titespot® angle heads are a proven solution to the old problem of right angle machining in confined areas. They utilize your high pressure coolant system to drive an integral positive displacement ball piston motor. As shown in the "Zoom" at right, the motor powers a drive shaft in turn driving the heads spindle. Exhausted coolant is directed at and through the cutting tool.
Because the Titespot® angle head has its own power source (the coolant), your machine's spindle is free to function as an indexer, allowing multi-position machining with one head and set-up. It's virtually like adding an axis of motion to your machine tool.
Unlike mechanically driven heads, Titespot® angle heads do not need a stop-block and do not depend on large bearings for housing support. Our angle head clamps rigidly into the spindle, allowing for more compact design with minimum deflection. In fact, Titespot® angle heads can machine in bores as small as
one inch
25.4 millimeters
in diameter and have been manufactured in lengths up to
24 inches.
610 millimeters.
|
|
 |
Durability and Versatility
Titespot® angle heads are manufactured to exacting standards and feature hardened spiral miter gears for efficient power transfer and durability. Our engineering staff can also design heads with custom angles, straight heads, and other special units for your application. Call toll free 1-877-435-8665.
|
Advantages
|
Typical Applications
|
- Eliminates secondary operations
- Machines in cavities down to
one inch
25.4 millimeters
diameter
- Loads from ATC
- Fully indexable on most CNC Machines
- Speeds to 13,500 rpm
- Elliptical head provides maximum rigidity in minimum bore
- External or through-the-tool coolant capability
|
 Multi-position
exhaust ports drilled
radially in the bore
of an aluminum overhead
door closer
(cutaway) |
 Two rows of bleeder
ports drilled radially
in the piston bore of
a cast iron hydraulic
motor housing |
| |
 Spiral grease channels
milled and
drilled in the bore of
a bronze bushing |
|
|
|
 |
|
Eltool Corporation | 1665 Central Ave., Cincinnati, OH 45214
Toll Free: 1-877-4ELTOOL (USA) | Phone: (513) 723-1772 | Fax: (513) 721-8974 | Email: Login
|
|